top of page
Arduino Mega 2560 R3 Compatible Board
The Arduino Mega 2560 R3 Compatible Board with Atmega 2560 CH340 is a powerful microcontroller board that is fully compatible with the Arduino Mega 2560 R3. It features the Atmega 2560 microcontroller and the CH340 USB-to-serial chip, which provides reliable and efficient communication with a computer. This board offers an extensive range of digital and analog input/output pins, making it suitable for complex and advanced projects.

      Arduino Mega 2560 R3 Compatible Board

      SKU: 180
      ₹2,500.00 Regular Price
      ₹1,500.00Sale Price

      • Specification

        • Microcontroller: Atmega 2560
        • Operating Voltage: 5V
        • Input Voltage (recommended): 7-12V
        • Digital I/O Pins: 54 (of which 15 provide PWM output)
        • Analog Input Pins: 16
        • DC Current per I/O Pin: 40 mA
        • DC Current for 3.3V Pin: 50 mA
        • Flash Memory: 256 KB (8 KB used by bootloader)
        • SRAM: 8 KB
        • EEPROM: 4 KB
        • Clock Speed: 16 MHz
        • USB-to-Serial Chip: CH340
        • Dimensions: 101.52mm x 53.3mm

        Usage

        • Gather the necessary components: Arduino Mega 2560 R3 Compatible Board with Atmega 2560 CH340, USB cable (Type-A to Type-B), and a computer with the Arduino IDE installed.
        • Make sure your computer is powered on but the Arduino Mega board is not connected yet.
        • Take the USB cable and locate the USB Type-A connector, which is usually rectangular and larger.
        • Connect the Type-A end of the USB cable to an available USB port on your computer.
        • Take the other end of the USB cable with the USB Type-B connector, which is square-shaped.
        • Locate the USB Type-B port on the Arduino Mega 2560 board. It is usually located on the left side of the board, marked as "USB" or "USB-B."
        • Align the Type-B connector with the USB Type-B port on the Arduino Mega board and gently insert it. Ensure a secure connection.
        • Once the cable is connected to both the computer and the Arduino Mega board, the board will receive power from the computer.
        • Open the Arduino IDE on your computer.
        • In the Arduino IDE, select the appropriate board by going to Tools > Board and selecting "Arduino Mega 2560."
        • Choose the correct processor by going to Tools > Processor and selecting "ATmega2560 (Mega 2560)."
        • Select the correct port by going to Tools > Port and choosing the port that corresponds to the Arduino Mega board.
        • Your Arduino Mega 2560 R3 Compatible Board is now successfully connected to your computer. You can begin programming and utilizing its numerous input/output pins for your projects.
      bottom of page