top of page

The SCT-013-000 100A Non-Invasive AC Current Sensor is a reliable and safe way to measure AC current without the need for direct electrical contact. It is designed to accurately measure AC currents up to 100 Amperes. The sensor consists of a split-core ferrite core and a built-in hall effect sensor, providing a non-intrusive method for current sensing in various applications.

      SCT 013 000 100A Non-Invasive AC Current Sensor

      SKU: 169
      ₹700.00 Regular Price
      ₹420.00Sale Price
      • Specification

        • Maximum Current: 100 Amperes
        • Turns Ratio: 1:2000
        • Output: Analog voltage proportional to the measured current
        • Frequency Range: 50-60Hz
        • Operating Temperature: -25°C to 70°C
        • Dimensions: 13mm x 13mm x 10mm


        • Identify the AC current line you want to measure and ensure it is within the sensor's rated maximum current.
        • Carefully disconnect the AC power source and open the circuit.
        • Place the split-core ferrite core of the SCT-013-000 sensor around the current-carrying wire.
        • Close the core around the wire, ensuring a secure and tight fit.
        • Reconnect the circuit and double-check the connections.
        • Connect the output wires of the sensor to the appropriate pins of your measuring device or microcontroller.
        • Provide power to your measuring device or microcontroller as per its requirements.
        • Write code in your microcontroller or use appropriate software to read the analog voltage output from the sensor.
        • Calibrate the sensor if required by using a known current source and adjusting the scaling factor in your code.
        • Monitor and interpret the measured current value in your application or display it on an output device as needed.
      bottom of page